Net Monitor | Cell Phone Troubleshooting

Net Monitor

There is list display code in net monitor menu for CDMA :

  1. More info about serving cell
  2. Serving cell, 1st and 2nd neighbour
  3. 3rd, 4th and 5th neighbour cells
  4. 6th, 7th and 8th neighbour cells
  5. Network selection display
  6. System information bits for serving cell
  7. Paging Repeat Period, TMSI, Location Update Timer, AFC and AGC
  8. Network parameters
  9. Cyphering, hopping, DTX Status and IMSI
  10. Uplink DTX switching display
  11. Toggle Screening Indicator
  12. Switch BTS_Test Status
  13. Lights status control
  14. Toggle Cell Barred Status
  15. Charging status
  16. Constant voltage charging display
  17. Battery full detection
  18. Battery and phone state
  19. FBUS display
  20. Reasons for SW resets
  21. Counters for resets
  22. Memory dump
  23. Information about reasons for call clearing
  24. Reset handover counters
  25. (in singleband phones) – Handover display
  26. (in dualband phones) – Handover display, INTER CELL
  27. (***in dualband phones) – Handover display, INTRA CELL
  28. L2 display
  29. Toggle revision level
  30. Toggle transmitter functionality
  31. SIM information
  32. Block display 1
  33. Block display 2
  34. Block display 3
  35. Memory status before reset
  36. Reset counters to zero
  37. Search and reselection counter display
  38. (dualband) – Search and reselection counter display
  39. Neighbour measurement counter display
  40. Call attempts counters
  41. Location Update attempts counters
  42. SMS attempts counters
  43. SMS timeout counters
  44. Temporary counters of DSP
  45. Control DSP audio enhancements 1
  46. Control DSP audio enhancements 2
  47. Generic display for DSP Audio Enhancements
  48. DSP audio enhancements 1 (DRC)
  49. Audio path status
  50. Ear (= downlink) audio display
  51. Microphone (= uplink) audio display
  52. DSP audio enhancements (AEC)
  53. Audio equalizer display
  54. Reset and restart timers
  55. Enable or disable timers
  56. Test timer display
  57. Control of task information displays
  58. Information of task numbers 8 – 15
  59. Information of task numbers 16 – 23
  60. Information of OS_SYSTEM_STACK
  61. Information of the current MCU and DSP software versions
  62. Information of the current Hw and TXT versions


produk
o

ARTIKEL & TIPS
testimoni